Driveway gates, pedestrian entry gates, and garden gates installed throughout Orange County. We work with wood, wrought iron, vinyl, and aluminum — HOA-friendly styles available. Free estimate, flat-rate pricing.
From simple pedestrian entry points to wide driveway gates, Dean's installs every gate type throughout Orange County. Gates are most often installed as part of a complete fence installation project, though we also add gates to existing fences. If your current fence or gate needs repair, see our fence repair service. Here's what we install:
Driveway swing gates — single or double panel, hinged to posts, the most common driveway gate style in OC residential neighborhoods
Driveway sliding gates — roll along a track parallel to the fence line, ideal for sloped driveways or limited swing clearance
Pedestrian / walkway gates — 3–4 ft wide entry gates for side yards, paths, and front entries
Pool safety gates — self-closing, self-latching gates per California pool safety code
Garden gates — decorative smaller gates for planters, raised beds, and yard separation
Security gates — heavy-duty steel or iron gates for commercial properties, parking areas, and high-security applications
Gate Materials: Which Is Right for Your Property?
The right material depends on your budget, HOA requirements, maintenance preferences, and the look you want. Common gate materials include wrought iron, vinyl (PVC), and powder-coated aluminum. Here's a breakdown of what we install:
Wrought Iron Elegant, highly durable, and see-through for security visibility. Iron gates can be custom-formed into decorative styles and powder-coated to resist corrosion. The premium choice for OC homes. Requires occasional touch-up painting to prevent rust.
Wood Natural, warm, and highly customizable in size, style, and stain. Cedar and redwood are popular for their natural rot resistance in Orange County's coastal climate. Wood gates require periodic sealing or painting to prevent warping and weathering.
Vinyl Low maintenance — never needs painting or staining. Vinyl gates are available in HOA-approved white and tan colors and resist moisture, UV, and insects. A great long-term value for busy homeowners.
Aluminum Lightweight, naturally corrosion-resistant, and available in any powder-coat color. Aluminum gates look similar to wrought iron but weigh significantly less — reducing stress on hinges and posts over time. Ideal for automated gate systems.
Manual vs. Automatic Gates
A manual gate is operated by hand — you push or pull it open and close it yourself, then engage a latch or lock. Manual gates are the most affordable option and have no mechanical parts to service. They're a solid choice for pedestrian gates, side yards, and garden enclosures.
An automatic gate uses an electric operator (motor) mounted on the gate or post. You open it with a remote, keypad code, or smartphone app — ideal for driveway gates where you don't want to exit the vehicle. Automatic systems also allow you to integrate keypads, video intercoms, and vehicle loop detectors.
Interested in automating your driveway gate? See our dedicated Automatic Gate Installation page for operators, access control options, and pricing.
HOA Gate Approval in Orange County
Orange County has hundreds of active HOAs, each with their own architectural guidelines for gate styles, materials, colors, and heights. Submitting an incomplete or non-compliant application is one of the most common causes of project delays.
Dean's guides you through the entire HOA submission process. We provide drawings, material specifications, and product cut sheets formatted for architectural review. We're familiar with common OC HOA requirements and can advise on the styles and materials most likely to gain approval in your community — saving you time and re-submission fees.
Gate Installation Cost in Orange County
Gate installation prices vary based on gate size, material, and hardware. Here's a general pricing guide:
Gate Type
Typical Range
Pedestrian gate (wood, 4 ft)
$400 – $900
Driveway gate (single swing, wrought iron)
$800 – $1,800
Driveway gate (double swing, wrought iron)
$1,500 – $3,000
Vinyl gate (standard)
$500 – $1,200
Automatic gate operator add-on
$900 – $2,500
All pricing is flat-rate and confirmed before work begins. Call (949) 899-6446 for your free on-site estimate.
Frequently Asked Questions
Whether a permit is required depends on the gate height and its location on the property. Requirements vary by city within Orange County. Dean's will advise you on permit requirements for your specific city before any work begins — so there are no surprises after installation.
Most gate installation projects are completed in 1–2 days. Straightforward pedestrian gates can often be done in a few hours. Larger driveway gates or projects requiring post-setting and concrete cure time may take slightly longer.
Wrought iron and tubular steel are the most secure gate materials. They are extremely difficult to cut through or climb, provide see-through visibility so there are no hiding spots along your fence line, and can last decades with minimal maintenance. Powder coating adds corrosion resistance for Orange County's coastal climate.
Yes. We can retrofit existing gates with a variety of lock hardware, including deadbolts, drop rods for double gates, and electronic keypad entry systems. Call (949) 899-6446 to discuss what hardware options are compatible with your existing gate.
Most HOAs in Orange County approve wrought iron or tubular steel gates, as well as gates that match the primary fence material on the property. Vinyl gates in neutral colors (white, tan) are also commonly approved. We are familiar with OC HOA standards and provide drawings and material specs to facilitate the approval process.
Yes. We install self-closing and self-latching pool safety gates that comply with California pool safety laws (Health and Safety Code Section 115922). All pool gate hardware is installed to code, ensuring the gate passes inspection and provides protection for children in and around the pool area.
Ready to Install Your New Gate?
Professional gate installation across Orange County, CA. Free estimate — HOA-friendly styles, flat-rate pricing.
